Three black screw-on replacement zipper pulls fitted on a jacket zipper

Screw-On Zipper Repair Kit

1 Set – 15 Pieces
$14.99
Skip to product information
Three black screw-on replacement zipper pulls fitted on a jacket zipper

Screw-On Zipper Repair Kit

$14.99
Shipping calculated at checkout.

Order today, most orders arrive

Pack

✓  Free US shipping on orders $49+

✓  Real people reply within 1 business day

Details

30-Day Love-It Guarantee. Damaged or wrong item: free replacement or full refund, shipping included. Changed your mind: refund of the product price after return.

Shipping: $6.99 on orders under $49, free from $49. Arrives in 7–13 days.

Gifting? Order by December 8 to leave time before Christmas.

Sound familiar?

One bad zipper, and a good coat sits in the closet

The zipper splits open behind the slider, or the little pull snaps off in your hand.

Fixing it means a needle and thread, or a tailor sewing in a whole new zipper.

So the jacket, bag or boots you still like go unused.

This one is different: a new slider that screws onto the old zipper by hand. No sewing, no tools.

3 reasons to keep a set

Why it belongs in the drawer

No sewing, no tools

It screws on with your fingers

Tightening the thumb screw by hand after sliding the pull onto the zipper

Loosen the small thumb screw, slide the new pull over the zipper teeth and tighten it again by hand. No needle, no pliers and no trip to the tailor.

3 sizes in every set

From a fine purse zipper to a heavy parka

Replacement zipper pulls in small, medium and large laid on fabric

Each set has 5 small, 5 medium and 5 large pulls for zipper teeth 3 to 10 mm wide. Use the size that fits today and keep the rest for the next zipper.

Easy grip

A metal slider with a pull you can hold

Close-up of two replacement zipper pulls with metal thumb screws and cord pulls

Each piece is a metal slider on a cord with a textured pull tab. It is bigger than the tiny tab most zippers come with, so it is easier to catch with cold fingers or gloves on.

Compared

The usual fix vs. this kit

This kit The usual fix
Sewing None New zipper sewn in
Tools Your fingers Needle, pliers or a tailor
Sizes S, M and L in one set Guess one size
Reuse Unscrew and move it Stays where it is sewn
Replacement zipper pull held in the hand and fitted on a zipper

A new pull fitted on a jacket zipper.

Sizes

Which size fits your zipper

Size Teeth width, zipped Zipper no.
Small 3–4.5 mm
0.12–0.18 in
#3
Medium 5–7.9 mm
0.20–0.31 in
#5, #7
Large 8–10 mm
0.31–0.39 in
#8, #10

How to measure: zip the teeth closed and measure straight across them. If the old slider is still on, the number stamped on its back is the zipper size. Not sure? Every set has all three sizes, so you can try the next one up.

In each set 15 pulls: 5 small, 5 medium, 5 large
Material Metal slider with a thumb screw and a cord pull
Color Black
Pull size S: 8 × 24 mm (0.31 × 0.94 in)
M: 10 × 25 mm (0.39 × 0.98 in)
L: 12 × 26 mm (0.47 × 1.02 in)
Weight About 4.2–4.6 g each
Zipper type Open-end (jackets) and closed-end (bags)
How to use

Fix it in 3 steps

  1. Loosen the thumb screwTurn the screw on the new pull until the slider opens up.
  2. Slide it onto the teethOn a jacket, feed in one side of the zipper. On a bag or other closed-end zipper, feed in both sides near the start.
  3. Tighten and zipTighten the screw by hand, then run the pull back and forth a few times until it opens and closes smoothly.

Handy for

  • 🧥 Coats and jackets
  • 🎒 Backpacks
  • 👜 Purses
  • 👢 Boots
  • 🧳 Luggage

A small gift for

  • 🎁 Stockings
  • 🧰 Dad's toolbox
  • 🎓 College students
  • ✈️ Travel kits
Choose your pack

One for home, one to share

$14.991 Set · 15 pulls5 of each size · + $6.99 shipping Save 13%$25.992 Sets · 30 pulls$13.00 per set · one to keep, one to give · + $6.99 shipping Lowest per set · Save 25%$44.994 Sets · 60 pulls$11.25 per set · for the whole family · + $6.99 shipping

Orders of $49 or more ship free, so add another item and shipping is on us.

Get 2 Sets · $25.99 Just 1 Set · $14.99 Questions

Good to know

Will it fit my zipper?

It fits most common zippers with teeth 3 to 10 mm wide, but not every one. Measure across the closed teeth and check the size chart above before you order.

Does it fix missing teeth or torn tape?

No. It replaces the slider and pull. If teeth are missing or the zipper tape is torn, a new slider cannot close that gap.

Can I take it off again?

Yes. Loosen the thumb screw and the pull slides off, so you can move it to another zipper.

When will it arrive, and what does shipping cost?

Standard shipping takes 7 to 13 days and costs $6.99 on orders under $49. Orders of $49 or more ship free. You get a tracking link by email once it ships.

What if it doesn't work for me?

Email support@shophollowbrook.com within 30 days of delivery. Damaged, defective or wrong items get a free replacement or a full refund including shipping. If you simply changed your mind, we send return instructions and refund the product price once it is back; return shipping is paid by you. A real person replies within 1 business day.

Don't give up a good jacket over one broken zipper.

Screw on a new pull by hand and keep using what you already own.

Add 1 Set to Cart · $14.99

Product photos are the supplier's images. Sizes are the supplier's hand measurements and may vary slightly.

Shipping & delivery

Orders ship within 1-3 business days, and most arrive within 7-13 days of ordering anywhere in the US. Standard shipping is free on orders of $49 or more and $6.99 below that. Need it sooner? Choose Express ($12.99, 5-9 business days) or VIP ($19.99, priority processing, 4-7 business days) at checkout. You'll get a tracking link by email as soon as your order ships.

Questions? Real people answer

Not sure if it's right for you, or need help with an order? Send us a message from our Contact page. A real person replies within 1 business day, Monday to Friday.

You might also like...